주메뉴 바로가기 본문 바로가기
Manufacture Process
Dream of Steel, Dream of TC
Process SLITTER LINE PROCESS
human · steel · nature - TC
SLITTER LINE PROCESS

The slitter line cuts the top of the input coil while continuously uncoiling the input coil, and then slits it in the width direction within the allowable tolerance limit based on the width requested by the customer. The slit strip is taken out after recoiling equally while giving a certain tension.

  • 01 Incoming the coil

    Confirm that the product name, thickness, width, weight, and material number of the coil are consistent with the production instructions.

    ※ Appearance inspection upon arrival
  • 02 Unpacking

    Remove steel bands and wrapping paper outside the coil

    ※ Inspection before input
  • 03 COIL CAR

    Equipment that transfers and charges the COIL carried on the COIL SKID to the UNCOILER

  • 04 UNCOILER

    Equipment that makes processing possible by loosening the coil

    ※ Thickness, width, and surface inspection
  • 05 THREE ROLL

    Equipment to facilitate sheet accommodation by transferring the top part of the coil

  • 06 #1 LOOP

    Equipment that enables speed synchronization with SLITTER and smooth centering work

  • 07 SLITTER

    Equipment that sets and slits the width of the product according to the demand of the customer

    ※ Check whether the processed product is defective, such as deflection, wave, or nick
  • 08 #2 LOOP

    Check whether the processed product is defective, such as deflection, wave, or nick

  • 09 SEPARATOR

    Recoiling of product smoothly by adjusting the partition

  • 10 BELT BRIDLE

    Equipment for smooth recoiling and generating a constant pressure in the strip

    ※ Surface warranty
  • 11 BRIDLE ROLL

    Equipment that detects the LINE SPEED and the length of SKELP and adjusts the tension

  • 12 RECOILER

    Equipment for rewinding processed products

  • 13 Packing

    Binding the processed product with steel bands for easy movement according to the demand of the customer

  • 14 Product storage

    Store in SKELP Zone for each company to enable rapid shipment using CRANE

  • 15 Shipment

    Products are selected based on the shipping order and shipped after loading

    ※ Appearance inspection at shipment
SLITTER Quality Control
  • Confirmation and measurement of raw materials before input

    Material number, thickness, width

  • Product inspection

    Product width, product thickness, surface, shape

  • Product inspection after completion of work

    Measurement of the overall product width and each product width